https://matlabhelper.com/blog/simulink/battery-management-system-in-matlab/ Education is our future. MATLAB is our feature. Tue, 09 Aug 2022 04:58:11 +0000 hourly 1 https://matlabhelper.com/blog/simulink/battery-management-system-in-matlab/#comments/1705 https://matlabhelper.com/?p=16187#comment-1705 Battery Management System used to monitor Batteries without human supervision to increase Battery life becouse sometimes due to overcharging battery got fire. Battery management systems (BMS) are electronic control circuits that monitor and regulate the charging and discharge of the Battery Pack or Group of Batteries. The characteristics which is to be monitored are detecting battery type, voltages, temperature etc.
it’s also used so that Battery could not used beyond its discharging capacity and also used for the Cell Balancing ( Active and Passive both), State of Health (SOH) and State of Charging (SOC) determination.
FETs used in BMS are usually MOSFET.There are two types of FETs are used in which DFET is used during charging and CFET is used during discharging.
The current Amplifier is used to measure the charge flow into and from the battery and to report it to Microcontroller.
BMC contains thermister for monitering of the Heat dessipation and a real time clock when Battery pack is doing nothing,real time clock alert MCU and BMC switches off.
Sometimes it happens that background functions of the system takes uses of the battery so if it possible then we should make a system in which only ongoing task can use the battery.

]]>